GS EGO II 2200 battery - Advise

FAQ for GS EGO II 2200mAh Battery Problems

 

How to activate the EGO II 2200 mAh Battery?

To activate the battery, tap the on and off switch and continue to inhale. Release the ignition button after inhalation. The power button on the LED lights up when pressed. If the battery does not light up, the battery must be recharged.

 

(Note: Prolonged pressure on the power switch may cause the fuel tank to overheat and damage it. Store the unit in an appropriate location without accidentally pressing the power switch. )

 

How to charge the EGO II 2200mAh Battery?

To charge, connect the mini USB charger to the top of the battery and plug it into a running adapter or socket or USB port. The battery indicator flashes to indicate that the battery is charging.

 

Note:

 

• Use only the supplied USB charger to prevent battery damage.
• Use high voltage USB connections for optimal charging performance (low voltage charges may not charge the battery correctly). Refer to your computer's user guide and or the online manufacturer's manual to figure out which of your port has high voltage USB ports.
• Charge the battery fully before using it to ensure good battery life.

 

How to store and look after the EGO II 2200 mAh Battery?

• Charge the battery at full capacity each time to achieve and maintain long battery life.
• Do not store the battery in a hot or humid environment and do not allow it to fall from high ground.
• Be careful when connecting or disconnecting the charger and dismantling and assembling tank parts.
• Never make a puncture in the battery. If you accidentally puncture the battery, use protective clothing and dispose of it carefully and responsibly.
• Do not fully discharge the battery. It is recommended to charge it almost empty without completely darning it.
• Do not leave the battery without electricity if you are not using it. Otherwise, the battery may become unusable.